Your current location:Home - Product

 

 

Flotation machine

 

 

General introduction of Flotation Machine:

 

Floatation machine is applicable for separating non-ferrous metal, black metal, noble metal, non-metal mineral, raw body and materials of chemical industry, which are subject to coarse separation, swept separation, fine separation and floatation, so the useful ore are reclaimed.

Flotation machine Application:

 

Flotation machine is applicable for the separation of nonferrous metal and ferrous metals, such as fluorite and talc. The impeller is driven by V-belts, which can bring the centrifugal effect to form negative pressure. While extracting sufficient air to mix with ore pulp, the machine stirs ore pulp and mixes it with chemicals to form mineralized froth. By adjusting the height of the flash board to control the liquid level, the useful froth can be scraped from the loam board. The height of the strobe must be adjusted carefully to keep the stabilization of liquid level and scrape the mineralized froth to the launder. The impellers and stators should be kept at a distance and should be changed when worn. The bearing in the pump should be maintained every three months.

 

Floatation machine working principle:

 

When the floatation machine works, the motor drives the impeller to revolve, so the centrifugal effect and negative pressure are produced. On one hand, ample air is absorbed and mixed with mineral slurry, on the other hand, the mixed mineral slurry is mingled with additive, meanwhile, the foams are thinning, the mineral is bounded with foams, and floats up to the surface of mineral slurry and the mineralized foam is formed. The liquid surface can be adjusted with the height of adjustment flashboard, so that the useful foams are scraped with squeegee.

Features of Floatation Machine:

 

1. Large air-absorption capacity

2. Low energy consumption

3. Every cell owns three functions: air absorption, slurry absorption, and floatation separation, and the cells form a floatation separation loop by itself without any auxiliary equipment, and is allocated horizontally, which favors the change of flow.

4. The circulation of mineral slurry is reasonable, and can avoid the disposition of coarse sand to the largest extent.

5. There is self-control device on the surface of mineral slurry, so it is easy to adjust it.

6.  The impeller has backward-inclined upper and lower vanes, which produce upper and lower circulation of mineral slurry respectively.

Technical parameters of Flotation machine:

 

Type

Volume
(m3/cell)

Inspiratory capacity
(m3/m2. min )

Power
( KW )

Production capacity
(m3 / min)

Weight
( Kg/cell )

BF0.15

0.15

1.0-1.10

1.5

0.06-0.16

280

BF0.25

0.25

1.0-1.10

1.5

0.12-0.28

386

BF0.37

0.37

1.0-1.10

4.5

0.2-0.4

482

BF0.65

0.65

1.0-1.10

3.0

0.3-0.7

940

BF1.2

1.2

1.10-1.20

4.0,5.5

0.6-1.2

1392

BF2.0

2.0

1.10-1.20

7.5

1.0-2.0

1800

BF2.8

2.8

1.10-1.20

11

1.4-3.0

2160

Hits:12376  Entry Time:2011/3/24 【Print this page】 【To return
 

Home | Enterprise brief | News | Product | After-sales service | Technical guidance> | Contact Us
Copyright 2011 Zhengzhou ZY Machinery CO.,LTD. All rights reserved
Phone:0086+15515991888
Address:Huagong Road, Zhengzhou City MSN:[email protected]      MSN Interlocution

Domain Name:www.755712.buzz
捕鱼电玩城官方下载 中信建投股票行情软件 排列三组六稳赚技巧 河北11选5任三技巧 私募基金配资比例 伊利股份股票分析报告 宁夏十一选五走势图五00期 中国体育彩票竞彩网 东方6十1历史开奖号码 股票融资余额增加 天津十一选5开奖时间